Many hyperlinks are disabled.
Use anonymous login
to enable hyperlinks.
15 check-ins that include changes to files matching 'schematics/AVR-Fan-Controller/*'
|
2023-08-12
| ||
| 14:15 | Added schematics and a circuit board design. check-in: de0b870077 user: thomas tags: trunk | |
|
2022-06-03
| ||
| 13:23 | Moved circuit to the top-right area of the sheet. Increased mounting hole size to 3mm diameter. check-in: 9e4461eeae user: thomas tags: schematics | |
|
2022-06-01
| ||
| 13:20 | Moved the two-pin pin headers away from the PCB border. check-in: 16394a254e user: thomas tags: schematics | |
| 13:08 | Further reduced PCB height to around 43mm. check-in: 1c4a28ad7a user: thomas tags: schematics | |
| 11:08 | Added PCB outline and four mounting holes (2.5mm each). check-in: fbe5309041 user: thomas tags: schematics | |
| 09:54 | Filled out the meta-data fields for the schematics and board. check-in: 9ebc651f00 user: thomas tags: schematics | |
| 09:46 | Replaced the barrel jack and potentiometer footprints with two-pin pin headers. This allows placing these components at a different location in the casing and route the wires to the board. Also compressed the layout to take up less space. check-in: e0b4bb13e1 user: thomas tags: schematics | |
|
2022-05-31
| ||
| 20:25 | Routed the complete circuit check-in: 29f8d2cc5a user: thomas tags: schematics | |
| 12:34 | Begin designing the circuit board. check-in: 8ce42835e2 user: thomas tags: schematics | |
| 11:01 | Replaced the variable resistor with the correct potentiometer symbol. check-in: dfa2cbd334 user: thomas tags: schematics | |
| 10:16 | Disabled unneeded layers in the PCB. check-in: 479cb88780 user: thomas tags: schematics | |
| 10:13 | Added decoupling capacitors to the μController Vcc and AVcc pins. Set AREF capacitor to 100nF to match the others check-in: 84d191a12c user: thomas tags: schematics | |
| 07:20 | Replaced GND and 5V power lines with connectors to the ground/power planes check-in: e35bfb6318 user: thomas tags: schematics | |
|
2022-05-30
| ||
| 21:32 | Continued the schematics: Fixed the wrong voltage divider resistor value. Used a better AREF decoupling capacitor value. Selected footprints for the PWM fan headers. Added power flags to the power input. check-in: 2fc9cb99a5 user: thomas tags: schematics | |
| 08:50 | Added (currently incomplete) schematics draft. Created in KiCad. check-in: 3e245dcdbb user: thomas tags: schematics | |